For 'H0' '00' and 'N' gauge layouts.
State-of-the-art design, electronics and construction, offer the very best in performance and capability.
Each 220/240 volts AC mains-powered controller, is designed with twin transformers, to supply correct voltage to each track.
Automatic re-set 1.1 amp circuit breakers protect against overload.
Mains lead 1.2 metres long.
Unique to Morley the Vector is designed with an on board heavy duty points Capacitor Discharge Unit (HD/CDU).When used with a correct momentary switch it will activate the points motor giving it a positive, short burst. Being of short duration it prevents motor burn out.
A "points CDU ready" yellow LED indicator is situated on the front panel.
The screen-printed front panel gives perfect indication of the settings of switches and controls, supported by LED indicators, a dual LED for power and direction, plus the CDU LED.
Centre off power controls, provide locomotive direction change, together with perfect smooth control at slow speeds as well as fast.
A 12Volt uncontrolled accessory output is provided with protection from a 1 amp circuit breaker.
Two hand held units are included with centre off controls providing power and direction change. The length of cable on each unit is 2.5 metres.
Output connections are by a Screw Type PCB Terminal Block.
A Cooling Fan is fitted on all Australian and NZ models.
Desk type dark grey case with sloping aluminium front.
Fully tested and guaranteed for 5 years.
Technical specification:
- Twin track controller manufactured from quality components
- Components tested to 105 degrees centigrade.
- Suitable for N,HO,OO and all small gauge layouts.
- Outputs:2 x 12 Volts DC at 1.1amps protected, both controlled
- 1 x 12 Volt DC accessory protected by 1amp circuit breaker.
- Locomotive direction change by centre off power control.
- On-board Capacitor Discharge Unit (HD/CDU) for points motor operation.
- Fan cooling on Australian and NZ models.
- Dimensions:215mm wide x 130mm height x 75mm max depth.
